CGXDJ - 98417 DENT-KOTE INSULATING PASTE
- MSDS: CGXDJ
- Manufacturer: DENTSPLY YORK DIV
- Product Name: 98417 DENT-KOTE INSULATING PASTE
- National Stock Number: 6520-01-139-9184
Product Identification
Product ID:98417 DENT-KOTE INSULATING PASTE
MSDS Date:06/17/1994
FSC:6520
NIIN:01-139-9184
MSDS Number: CGXDJ
Responsible Party
YORK, PA 17405
US
Emergency Phone: 717-845-7511/800-424-9300(CHEMTREC)
Info Phone: 717-845-7511 / FAX 717-845-6377
Preparer: W.DONALD WILSON
Cage: 16969
Contractor
Telephone: 717-845-7511
Cage: 16969
Ingredients
NONE STATED BY MFG.
RTECS: 9999999ZZ
Fraction By Weight: NA
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYE CONTACT:FLUSH EYES W/WATER FOR 15MINS.IF IRRITATION
PERSISTS CONSULT PHYSICIAN.
Fire Fighting
Flash Point Method:TOC
Flash Point:>400F,>204C
Autoignition Temp:Autoignition Temp Text:NA
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:ALL STANDARD FIRE FIGHTING AGENTS ARE SUITABLE.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:SCRAPE UP AND PLACE IN CONTAINER FOR DISPOSAL.
Handling
Handling and Storage Precautions:OBSERVE NORMAL WAREHOUSING
PROCEDURES.STORE AWAY FROM FOODSTUFFS AND BEVERAGES.
Exposure Controls
Respiratory Protection:NONE UNDER NORMAL USAGE.
Ventilation:GENERAL
Protective Gloves:PLASTIC GLOVES
Eye Protection:SAFETY GLASSES
Other Protective Equipment:RUBBER APRON.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:NA
Melt/Freeze Pt:M.P/F.P Text:NE
Decomp Temp:Decomp Text:NE
Vapor Pres:NA
Vapor Density:NA
Spec Gravity:1.2
pH:NA
Viscosity:15000CPS
Evaporation Rate & Reference:NA
Solubility in Water:NOT SOLUBLE
Appearance and Odor:WHITE PASTE WITH SLIGHT ODOR OF ALCOHOL
Percent Volatiles by Volume:NA
Corrosion Rate:NA
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:EXTREME HEAT.
Hazardous Decomposition Products:CARBON DIOXIDE AND SILICON DIOXIDE.
Conditions to Avoid Polymerization:EXTREME HEAT.
Disposal
Waste Disposal Methods:THIS MATL WHEN DISCARDED IS NOT HAZ WASTE PER
FED REGS.40CFRPART 261.DISPOSAL SHOULD BE IAW APPLICABLE STATE AND
LOCAL ORDINANCES FOR DISPOSAL OF INDUSTRIAL WASTE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.